Soap base Crystal WNS (No sweat, Anti-condensation) White
A plant-derived soap base specially formulated for wet conditions, used to make clear bars of soap.
Product Features Specially formulated for wet conditions Ideal for making simple unrolled bars of soap Fantastic clarity allows vibrant colors to stand out Good foaming efficiency Excellent color stability Neutral scent provides excellent scenting Suitable for cutting or molding
To create your own handmade glycerin soap kit, here's what you'll need:
1. Cut Crystal WNS into small pieces;
2. Add fragrance or essential oil;
3. Add dry botanicals if desired;
4. Melt in the microwave or in a water bath;
5. Pour into mold. A simple recipe for making handmade soap:
1.Open/Cut - Simply open the package, safely cut the Crystal soap base into smaller cubes, making the soap easier to process and melt.
2. Melt - Heat the soap base gradually so that the soap melts evenly and does not boil or burn. If you melt in the microwave, be careful and keep an eye on the soap as it may bubble on the container.3. Mix - You can use essential oils, fragrances, colors, botanicals and additives. Simply add to your melted soap base, stirring gently to distribute any fragrance you add evenly throughout the soap base.4. Pour - Working quickly, simply pour the soap base into the soap mold. At this point you can add the dried botanicals to the surface of the soap, gently pressing them into the top of the soap if you wish.5. Create - Once your soaps are set and fully cured, simply remove them from the molds. We recommend always wrapping your soap bars immediately after removing from the mold to protect and preserve the soap.
Compound:
Aqua 25–50
Sorbitol 10 -25
Sodium Stearate 10 –25
Sucrose 5–10
Propylene Glycol 5 –10
Sodium Laureth Sulfate 5 –10
Sodium Laurate 1–5
Glycerin 1–5
Sodium Myristate 1 –5
Sodium Lauryl Sulfate 1 –5
Sodium Chloride 1–5
Titanium Dioxide 0.1 –0.5
Stearic Acid 0.1 –0.5
Lauric Acid 0.1 –0.5
Pentasodium Pentetate <0.1
Tetrasodium Etidronate<0.1